Products List
Inquiry
Ensure that an organic solvent is flushed through the HPLC system and column at least once every 48 hours to kill unwanted microbial growth. Alternatively add a small amount of sodium azide to the aqueous solvent to inhibit growth. Note: Never allow a HPLC column or system to stand with water or buffer in it for an extended period of time.
Use Thermo Scientific 11 mm Clear Glass Crimp/Snap Top Vials with snap caps or aluminum crimp seal closures. These high-quality 11 mm clear glass vials are 2 mL, 12 x 32 mm and fit most brands of autosamplers. Made of superior quality 33 ex
2 Transfer samples to reaction vials or a PCR plate • The kit is designed to label up to 25 nmols of glycans per reaction. With a single pure glycan, as little as 5 pmoles per reaction can be labeled and detected in subsequent HPLC and MS analysis.
High-performance liquid chromatography (HPLC) is an important analytical method commonly used to separate and quantify components of liquid samples. In this technique, a solution (first phase) is pumped through a column that contains a packing of small porous particles with a second phase bound to the surface.
clear glass vials are Type 1, 33-expansion glass. Type 1, 51-Expansion Glass More alkaline than 33-expansion glass and is adequate for many laboratory uses. It has an expansion coefficient of 51x10–7 ˚C and is composed primarily of silicon and oxygen, with trace amounts of boron. All Waters amber glassware is Type 1, 51-expansion glass.
lid Centrifugation of 1-2 mL Cryotubes® (max. Ø 13 mm, use with adapter) and screw-cap centrifugation tubes (max. Ø 17 mm, adapter not needed) Adapters for 12 x 32 mm HPLC vials available (1223J67) Rotor and adapter are autoclavable (121°C, 20 min)
Final standard solutions were each prepared from the stock described above, in 2 mL HPLC vials using calibrated and certified micropipettes. Since the prepared mobile phase is not commonly used in HPLC units, a compatibility check with all the corresponding HPLC parts was first performed and DI water was used to flush the HPLC for 30 mins after
Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.
CanLab is the leading supplier of Lab Supplies in Canada. Our selection of lab Supplies consists of best quality from all leading brands. We supply well known brands like Corning/Pyrex beakers, flask, glass tubes, funnel, Qualitative filter paper from GE and Laboratory Note Books.
Orochem Technologies offers vials for HPLC, GC and storage. The volume is from 0.1 mL to 4 mL. Both glass and plastic vials, with or without insert. There are several types of caps and septa. HPLC vials fit into most major brands of HPLC autosamplers.
This custom pharmaceutical labeling system features rotary infeed tray and product accumulation system. It is designed specifically for small diameter glass vials at speeds up to 300 products per minute. Additional features include full vision system, Allen Bradley PLC control, PanelView color touchscreen and validation package.
Standard Screw Thread HPLC Vials: Screw thread caps and vials are often used in conjunction with Shimadzu, Spectra-Physics, Varian, and other autosamplers; Vials are manufactured of Clear, Type 1 Class A or Amber, Type 1 Class B borosilicate glass and include a write-on patch for sample identification
It’s not unusual for an analytical chemistry lab to run between 250 and 1,000 autosampler vials a day. As a result, vial labeling becomes so difficult and time consuming that many analytical chemistry labs turn to unreliable hand-written vial labels for analytical chemistry or run autosampler vials without any label at all.
Restek develops and manufactures GC and LC columns, reference standards, sample prep materials, and accessories for the international chromatography industry. Our unbeatable Plus 1 customer service and top-quality products are known world-wide.
Vials and closures listed in this section are designed, engineered and manufactured for optimum performance with HPLC and LC/MS applications.
A great deal of energy, money, and time can be spent on sample preparation. The last thing you need is for a sample vial to contribute to contamination resulting in complicated data interpretation or complete reanalysis. By using certified
About product and suppliers: 970 hplc vial products are offered for sale by suppliers on Alibaba.com, of which laboratory bottle accounts for 29%, vitamins, amino acids and coenzymes accounts for 9%, and bottles accounts for 6%. A wide variety of hplc vial options
2ml Glass Vial is in wholesale price. Compared with other supplier price, you can get reasonable price from Aijiren. 100% factory price. 2ml Glass Vial is supplied to lab, directly. No matter where you are located, you can get free sample to test before you buy it.
A broad selection of Tubes, Vials, Caps and Closures recognised for quality, reliability and consistency. Developed for safety and dependability in your rigorous laboratory conditions. For all general or sales enquiries, please contact us by phone below: 1300-735-292
Aijiren certified 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 9 mm screw caps and closures are available with septa constructed from
Aijiren Vials and Sample Containment Solutions Brochure Quickly and easily find the best vial solution to exceed your goals with Aijiren, and know that you have Aijiren quality and expertise every step of the way. Brochures English 24 Feb 2017 2.28 MB PDF
Thermo Scientific 9 mm Wide Opening Amber Glass Screw Thread Vials are 2 mL, 12 x 32 mm and built with Advanced Vial Closure System (AVCS). This innovation not only prevents septa push through, but provides a stop point for the cap to prevent over- or under-tightening and provide an optimal, consistent seal every time.
5.4.11 Clear glass vials, 2-mL with white label, compatible with Aijiren UHPLC system, p/n 5.4.12 Glass 10-mL vials for standard preparation 6.0 Chromatographic and Mass Spectrometry Equipment 6.1 Aijiren UHPLC system with 6.2
lid Centrifugation of 1-2 mL Cryotubes® (max. Ø 13 mm, use with adapter) and screw-cap centrifugation tubes (max. Ø 17 mm, adapter not needed) Adapters for 12 x 32 mm HPLC vials available (1223J67) Rotor and adapter are autoclavable (121 C, 20
Large green cap glass vials (23 x 85 mm, BGC vials (Kimble Inc.) (11) Small green cap glass vials (15 x 45 mm, SGC vials) (Kimble Inc.) (12) 15 mL disposable conical centrifuge tubes (C tubes) (Kimble Inc.) F. Instrumentation Analytes were separated on
Extensive range of vials and accessories including glass vials, scintillation vials, blood vials, conical vials and more. Fisher Scientific offers the vials you need for all of your laboratory requirements and applications. Whether your needs include chromatography
Our tubular vials product range includes clear and amber vials in glass types I, II and III from 0.6 to 100 ml. We produce different designs, with or without blowback, according to industry standards or to individual specifications.
• Glass autosampler vials 1.5 mL with slit septum (P/N 055427) • Thermo Scientific Nalgene Rapid-Flow Sterile Disposable Filter Units with Nylon Membrane (1000 mL, 0.2 μm pore size, Fisher Scientific P/N 09-740-46) • Nitrogen ultrahigh purity
Glass is inert and thus more chemically compatible than plastic, so the only concern about the chemical resistance of lab glassware is the type of liner inside the cap. All popular lab bottle styles are available, including Boston Rounds, Wide Mouth Rounds, Straight Sided Jars, Square Sided Bottles, and Plastic Coated Bottles.
Vials, screw top, amber glass (vial only) volume 2 mL, amber glass vial, thread for 10-425, pkg of 100 ea; find Supelco-27267-U MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.
consignment System Components: Outer Box – OD 6 1/2 x 6 1/2 x 8”, pre-printed with: Class 6 Infectious Substance Label & UN2814 Marking STP-102 50 mL Absorbent Strip and 6 x 10” Bubble Wrap (1 ea.) STP-104 1.25 L Reusable