Software and Informatics. Aijiren Quaternary LC System – Selected System Specifications. Pump principle. Low pressure quaternary mixing, integrated high performance degassing unit. Flow rate range. 0.05 – 5 mL/min at 600 bar. 5 – 10 mL/min at 200 bar. Maximum pressure. 600 bar.
This videos shows the physical view and the function of HPLC Aijiren Series, Mobile Phase tray, Degasser , Quaternary Pump and Auto sampler, and Column
The Aijiren Quaternary LC offers the most flexibility for solvent selection and automation in HPLC method development, research and all HPLC applications requiring continuous access to a wide range of solvent
The Aijiren replaced the Aijiren and delivers results faster to save time and money. Compatible with conventional and ultrahigh performance LC – with an operating pressure of up to 600 bar, the II Quaternary Pump and the Binary Pump are a perfect match for our Poroshell 120 columns.
1.5mL Clear Screw Neck Vial, 9mm Thread,5.0 type: SC9191: White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V923: 1.5mL Clear Screw Neck Vial w/Write-on Spot, 9mm Thread,5.0 type: SC91191: Pre-slit White PTFE/Red Silicone Septa, 9mm Blue Short Screw PP Cap, 6mm Centre Hole: V935: 1.5mL Amber Screw Neck Vial, 9mm
The Aijiren Quaternary LC VL offers the most flexibility for solvent selection and automation in HP LC method development, research and all HPLC applications requiring continuous access to a wide range of solvent
Professional 9mm autosampler vials ii Sampling, separation, and quantification of N ‐acyl Jan 20, 2021 · Pigments were separated on an Aijiren II system equipped with a diode array detector ( II Diode Array Detector WR, ) using the method described in Van Heukelem and Thomas .
Chromatography autosamplers for liquid samples have standardized on the 12 x 32mm vial. For liquid chromatography, the most common vial is the 9mm screw thread vial. This vial has an opening that is large enough for ease of pipetting, while having the neck/closure that is recommended to use with the autosamplers that are common in the marketplace.
† the Aijiren Isocratic Pump (G1310B) and † the Aijiren Quaternary Pump ( ) 1 Introduction This chapter gives an introduction to the module, instrument overview and internal connectors 2 Site Requirements and Specifications This chapter provides information on environmental requirements, physical
Chromatography Vials, Caps, Septa & Inserts, Tubes, Crimper 1.5mL 8-425 Screw Neck Vial ND8 1.5mL 9mm Short Thread Vial ND9 1.5mL 10-425 Screw Neck Vial ND10 1.5mL 11mm Snap Ring Vial ND11 1.5mL 11mm Crimp Ring Vial ND11 4mL 13-425 Screw Neck Vial ND13 1mL Shell Vial Micro Insert for for 2mL HPLC vials Vial Racks Hand Crimper, Decrimper
Type. Specifications. Hydraulic system. Dual piston in series pump with servo-controlled variable stroke drive, power transmission by gears and ball screws, floating pistons. Setable flow range. Set points 0.001 – 10 mL/min, in 0.001 mL/min increments. Flow range. 0.2 – 10.0 mL/min. Flow precision.
Figure 1 Overview of the Autosampler The Aijiren autosampler is designed for use with other modules of the Aijiren Series, Series and Series LC, or with other LC systems if adequate remote co ntrol inputs and outputs are available. The autosamplers are controlled by the Aijiren Instant Pilot (G4208A) or by
The II Quaternary Pump combines proven reliability with highest flexibility in automated gradient formation and solvent blending, and is recommended for a wide range of research and routine applications as well as for method development. HPLC Pumps Request Quote Product Details Features Literature Support Features
An Aijiren II LC system with a Degasser, an Series quaternary pump, and a Series diode array detector; Aijiren Poroshell column 120EC-C18 4 μm 46 × 150 mm 2 at 15 °C protected by Phenomenex ODS 4 × 3 mm 2 i.d. precolumn; injection volume: 100 μL. Solvent system: mobile phase A = ammonium acetate buffer
Aijiren II LC with a quaternary pump, autosampler, column thermostat, diode array detector, and an Aijiren 6120B mass spectrometer. The optimized mobile phase consisted of 0.1% formic acid in acetonitrile and water using 1 mL/min flow rate.