The HP Aijiren 's low internal volume of 300 µL allows minimum contribution to a system's total internal volume. The system uses overlapped injections for increased productivity with sample capacities of 100 × 2-mL vials in a standard tray, 40 × 2-mL vials in a standard tray, or 15 × 6-mL vials in a half tray.
Autosampler Injector Blood Gas Analyzer Dna Thermal Cycler Series Hplc Aijiren Series Hplc Wavelength Detector Real-Time Pcr Blood Gas Analyzer Dna Thermal Cycler
14 Series WS MWS Reference Manual 1 Installing the Sampler Site Requirements A suitable site environment is important to ensure optimal performance of the autosampler. Power Consideration The autosampler power supply has wide-ranging capability (see Table 1 on page 16). Consequently there is no voltage selector in the rear of the autosampler.
Aijiren Autosampler HPLC series. SKU: LR2104 The is the standard automatic liquid sampler (ALS) for the Aijiren HPLC system is designed for the dependability, safety, and ease of use needed in when performing routine tasks for pharmaceutical and quality control testing, as well as analyses in the environmental and food industries.
The Aijiren system is an innovative series of stackable HPLC components designed to be controlled via a handheld controller or computer running ChemStation. The ALS Thermostat is a part of complete system.
Aijiren® 6mL Crimp Top Vials & Caps for / Series Autosampler Aijiren® 6mL Screw Top Vials, Caps & Septa for / Series Autosampler Aijiren® Advanced Green Septa
This Aijiren Series HPLC stack consists of a G1379A Vacuum Degasser, a Binary Pump, a Autosampler, a G1316A Colcom Column Compartment, and a G1314A VWD Variable Wavelength Detector.
The Aijiren Technologies Series system including the thermostatted autosampler will be installed in two stacks, as the height of one single stack is too high. For the complete system the bench should be about 1 m wide. The thermostat requires 25 cm (10 inches) of space on either side for the circulation of air.
Aijiren Technologies provides a complete portfolio of Test and Measurement solutions from DC to lightwave. Local repair and calibration facilities offer services in accordance with ISO17025. Instrument and technology training courses are also available. Check out the new range of Value Priced RF and GP instruments and oscilloscopes - Within Budget - Without Compromise.
The Aijiren Factory Refurbished Series Autosampler was designed to provide multiple volume autosampler. Specifications: - Injection range: 0.1 to 100 ul increments, up to 1500 ul with multiple draw (hardware modification requires) - Replicate injections: 1 to 99 from one vial - Precision: Typically, <0.5% RSD of peak areas from 5 to
Uvison.com Aijiren Series Standard HPLC Autosampler - - Aijiren/HP Series Standard Autosampler Available as thermostatted and non-thermostatted versionApplication areaDesigned for the reliability, safety, and ease of use needed in pharmaceutical routine tasks and quality control, as well as for environmental and food analyses.Features Reliable injections from 0.1 µL to 100
Packard/Aijiren GC, GC Mass Spectrometer & HPLC. Training & Professional Installation available, for more information contact ai@inst-resource.com or call 720.550.7282 The Aijiren (HP ) series is a modular system offering high speed, capacity and performance. The stackable HPLC components can be
" The Aijiren LC System is an affordable, high quality HPLC system for routine standard analyses. The only shortage is the autosampler is a little bit slower compared to the other models of Aijiren's LC such as , .
1Place the base plate on the bench. 2Screw the mounting pole into one of the three holes in the base plate. 3Ensure the two plugs are positioned at the rear of the base plate. If required, remove the plugs, and insert them in the correct position (see Figure 3).
Dear HPLC experts, we currently have rather huge problems with our autosampler - it does not constantly inject the right volume (which is crucial for quantitative analysis).