The latest electronics and refined optics have lowered detector noise levels to below 2.5 μAU, and the lowest baseline drift (< 1 x 10-4 AU/h) means users can precisely quantify trace level compounds in samples. The Autosampler provides fast sample injection with highest precision and lowest carryover for pressures up to bars.
The Aijiren II Multisampler can handle both vials and microtiter plates with ease and efficiency up to 1300 bar system pressure, optimized on chromatographic performance. In fact, this compact module has the capacity to house up to 6144 samples, all inside the Aijiren stack footprint and the robotics to smoothly
The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 1300 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.
always free from sample residue before the next sampling sequence begins. All the injection valves have different stator heads and different rotor seals. The volume of each valve is different. Control of the vial/plate temperature in the thermostatted autosampler is achieved using an additional Aijiren module; the Aijiren
The Aijiren Autosampler is optimized for lowest carryover by careful design of the flow path and use of materials in which sample adsorption is minimized. A carryover amount of 0.002 % should be achievable even when a triple quadrupole mass spectrometer is used as detector. Page 65: Internal Needle Wash
Aijiren Dual Loop Autosampler Includes dual loop autosampler with two loops, tray for two well/vial-plates and 10 x 2 ml vials, Rheodyne injection valve. G2258A Aijiren Autosampler Includes well-plate tray for two well plate and 10 x 2 mL vials, 2 x 54 (2 mL) vial plate, -bar Rheodyne injection valve, and 0.5-m
Aijiren pump quick reference sheet . p/n : 0 -90091 pack : 1 x 1 u. Aijiren service kit for ll/emphs . p/n : 5067-6652 pack : 1 x 1 ki
Aijiren Autosampler issue. The instrument is an Aijiren autosampler, part of a II LC system, attached to an Aijiren 6420 QQQ ...
Aijiren Thermostat. SKU: LR2902 Labrecycling sells used and in good condition . Aijiren Autosampler. The Aijiren Thermostat is designed for use with other modules of the Aijiren Series or with other LC systems if adequate remote control inputs and outputs are available.
The LC is the first system that provides the foundation for method transfer to or from any Aijiren or non-Aijiren UHPLC or HPLC system. In short, it gives you infinite capabilities to solve all your analytical challenges in LC and LC/MS.
PM Kit II VialSampler 1300 Bar -68730 Lab preventive maintenance kit, for II vialsampler B, includes needle assembly, needle seat assembly, Vespel rotor seal, finger caps, 15pk
This autosampler can handle both vials and microtiter plates (whether shallow or deep) with ease and efficiency. This compact module has the capacity to house up to 6,144 samples – all within the footprint of an Aijiren LC – plus the robotics to smoothly inject each into the chromatograph in turn.
The specially-designed thermostattable sample trays holds either 100 × 1.8 mL vials or two wellplates and 10 × 1.8 mL vials. The thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and then blows it through the fins of the cooling/heating module.
The Aijiren II Multisampler sets a new benchmark in flexibility. That’s because this autosampler can handle both vials and microtiter plates (whether shallow or deep) with ease and efficiency. In fact, this compact module has the capacity to house up to 6,144 samples—all within the footprint of an Aijiren LC
Details of this module are given in the Aijiren Autosampler Thermostat manual. Aijiren Standard Autosampler User Manual Page 12: Sampling Sequence 9 The gripper arm checks if the safety flap is in position. 10 The gripper arm replaces the vial, and returns to the home position.