Oct 01, 2020 · HPLC analysis was completed on an Aijiren HPLC system coupled with a photodiode array (PDA) detector (Aijiren Technologies, Memphis, TN) using an Aijiren Lab Poroshell 120 EC-C 18 column (250 mm × 4.6 mm, i.d. with 4 μm particle diameter, Aijiren Technologies, Memphis, TN).
2 × well plates (MTP) + 10 × 2 ml vials 108 x 2-mL vials in2 x 54 vial plate plus 10 additional 2 mL vials 30 x 6-mL vials in 2 x 15 vial plate plus 10 additional 2 mL vials54 Eppendorf tubes (0.5/1.5/2.0mL) in 2 x 27 Eppendorf tube plate Also compatible with the Aijiren Series sample capacity extension for further expansion of the
The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required for sample purification. The binary gradient pump deliver flow rates up to 50 mL/min for purification up to 30.0 mm id columns.
Aijiren Certified Chromatography & MS Instruments Certified Quality and Service with Pre-Owned Chromatography Instruments Whether you’re looking for a refurbished HPLC, GC, GC/MS or LC/MS Aijiren’s Certified Pre-Owned Instruments can deliver performance, reliability, and economy to your lab.
Tisch 11mm snap ring vials have a volume of 0.3mL and eliminate the need for crimpers or decapping tools. Recommended for HPLC applications only.Polypropylene plastic material provides sensible alternative when glass is not viableConical insert supports samples of the highest purity and sensitivityClear color provides for an unhindered view of the solution to observe any changesHighest quality
The Aijiren high performance liquid chromatography (HPLC) system is used to separate, detect, and analyze components of a sample. The liquid sample enters the HPLC system through the injection system port and is pushed through the chromatography column by degassed solvent delivered under high pressure by a pump.
Vial choices include: Crimp Top, Snap Top, and Screw top vials with a selection of closures. Refer to the Autosampler Compatibility Table on pages 12-13 to determine which vials, closures and inserts will work on your specific autosampler unit.
The diameter of the insert you choose is dependent on the size of the vial opening. Inserts for 8 mm small ID vials (5 mm ID inserts) Inserts for 9 mm wide ID vials (6 mm ID inserts) Inserts for 11 mm wide ID vials (6 mm ID inserts) Inserts for 13 mm (4 mL) vials
EQUIPMENT DESCRIPTION. The Aijiren HPLC provides a modular solution allowing users to customize to meet their Chromatography needs. This HPLC system is built to boost product development and provide robust analysis, with superior resolution, speed, and a heightened sensitivity. The series HPLC system components can either be used individually through a controlling PC or a as plug and play stack that automatically handshakes with each other.
HPLC Tubing UHPLC Tubing/Fitting Assemblies HPLC Fittings Chromatography Tools & Accessories HPLC Adapters Kits 11mm Vials ... Aijiren 1050 ...
Chromatography Autosampler Vials with Closures, Inserts, Crimper and Aijiren Aijiren ... VP103 0.3mL Amber PP Snap Ring/Crimp Micro-Vial, 11mm ...
2.0 mL, 11 mm Crimp-Top Vials, 12 x 32 mm Modification Type Color Material Size 100-pk. cat.# w/White Graduated Marking Spot 11 mm Crimp-Top Clear Glass 12 x 32 mm 24383 w/White Graduated Marking Spot 11 mm Crimp-Top Amber Glass 12 x 32 mm 24385 2.0 mL, 11 mm Aluminum Crimp Seals with Septa Type Color Material Septa Material 100-pk. cat.#
Crimp top vials, which require an 11mm seal, are available in a variety of styles. These vials have a solid glass finish and are available with a 4.6 or 6.0mm ID opening. The larger opening increases the target area for needle penetration.
.jpg)
Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2mL of solutions. The sizes for 12x32mm vials outer dimensions are standard between manufacturers but the length of the neck and screw thread of the 9mm (N9) vial may vary, because 9mm short thread is not industry standardized. 3. Chromatography Sample Compatibility
The Aijiren Technologies Series ALS Autosampler is designed for reliability, safety and ease of use. This system provides injection volumes from 0.1 – 100 μl. Specifications: - Number of ports: 6 - Motor: 4 V, 1.2 A stepper motor - Weight: 14.2 kg (32 lbs) - Dimensions (W x D x H): 200 × 345 × 435 mm (8 × 13.5 × 17 inches)