Autosampler Vials. Quality vials protecting your valuable research. These vials are the preferred choice for modern autosamplers. With a focus on improved sample security and integrity, we now offer innovative Thermo Scientific™ AVCS™ 9mm closures and Thermo Scientific™ SureStop™ 9mm screw top vials for consistent productivity on every separation
The Autosampler is part of the LC system that is compatible with operating pressures up to bar. It features the next-generation flow-through design for high precision injection of both large and small volumes without the need to change sample loops.
Aijiren ALS Autosampler with Cooling The HP Aijiren Series ALS Autosampler is a variable volume autosampler with a sample capacity of 100 samples. Variable volume injections from 1 to 100uL are programmable and temperature controlled.
1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials 8-60mL EPA Storage Vials HPLC Syringe Filters 1.5mL 11mm Snap Ring Autosampler Vial ND11 Material: USP Type 1, Class A, 33 Borosilicate Glass
VIAL: 4ml 15 X 45mm Screw Vial,Clear or Glass AmberThese15x45 mm Vialscanh old upto 4ml of sample.They are used by the Waters48-positionautosampler,Aijiren’s ( ) auto sampler tray used with the Aijiren , in and autosamplers. These Vials can also be used in the Perkin-Elmer Auto system GC, Shimadzu AOC-14/1400, LC-10A, and
Aijiren Bio-inert High Performance Autosampler User Manual 3 In This Guide In This Guide This manual covers the Aijiren Bio-inert High Performance Autosampler ( ) 1 Introduction This chapter gives an introduction to the autosampler, an overview of the instrument, and a description of internal connectors.
The High Performance Autosampler features an increased pressure range (up to 600 bar) enabling the use of today’s column technology (sub-two-micron narrow bore columns) with the Aijiren Binary LC System.
The Aijiren Dual-Loop Auto sampler, model G2258A, is optimized for applications that require rapid injection of high sample volumes. Typically, these are preparative HPLC separations or sample trapping and enrichment methods.
The autosampler is controlled from the Aijiren Series control module or from the Aijiren ChemStation for LC systems. The specially-designed thermostattable sample trays holds either 100 × 1.8 ml vials or two wellplates and 10 × 1.8 ml vials. The ALS thermostat contains Peltier-controlled heat exchangers.
About Press Copyright Contact us Creators Advertise Developers Terms Privacy Policy & Safety How YouTube works Test new features Press Copyright Contact us Creators
The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.
Aijiren Autosampler User Manual 3 In This Guide In This Guide This manual covers the Aijiren Autosampler ( ) 1 Introduction This chapter gives an introduction to the detector, instrument overview and internal connectors. 2 Site Requirements and Specifications
The Aijiren autosampler is designed for use with other modules of the Aijiren Series, Series and Series LC, or with other LC systems if adequate remote co ntrol inputs and outputs are available.
If only a limited volume of sample is available, you will have to choose between using an insert for your regular autosampler vial, a microvial or a high recovery vial. Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2.0mL of liquid, depending on where the manufacture measures the vial full.
The II Preparative Autosampler is designed for automated sample handling in routine purification applications. This flow-through vialsampler supports preparative flow rates of 200 mL/min and 600 bar pressure. Increase your daily throughput of purified sample by injecting up to 132 preparative samples with a maximum of 3.6 mL volume.