Thermo Scientific crimp top vials for HPLC and GC are available in 8mm, 11mm, or 13mm crimp border diameter in clear and amber glass and plastic. Microsampling options for small-sample-volume injections include one-piece microvials and standard inserts added to crimp top vials. Crimp vials are sealed with aluminum caps with septa using crimper
.jpg)
The thermostat is controlled from the Aijiren Series Instant Pilot or from your Aijiren control software for LC systems. The specially- designed thermostattable sample trays holds either 100 × 1.8 mL vials or two wellplates and 10 × 1.8 mL vials. Specifications: Temperature Range: Settable from 4 °C to 40 °C in 1 ° increments
samples • 50 mL polypropylene centrifuge tubes • 15 mL polypropylene centrifuge test tubes • 1.5 mL polypropylene microcentrifuge tubes (optional) • Polypropylene 700 µL autosampler vials • Amide UHPLC column, • Amide precolumn, 130 Å, 1.7 µm, 2.1 mm × 5 mm • Supelco Supelclean ENVI-Carb 250 mg/3 mL or equivalent carbon column
Polypropylene Vials. Aijiren polypropylene certified vials for autosampler use are translucent and chemically resistant. They are the vials of choice for pH-sensitive samples, sodium, or heavy metal analyses. Polypropylene vials come as either a snap vial style, crimp vial style, or screw vial style and can contain sample volumes up to 700 μL
Autosampler vials & caps for HPLC, LC/MS, GC and GC/MS. There’s a Thermo Scientific vial & closure for every HPLC, GC, MS instrument, application, and budget. Screw Vials, Caps, Septa, Inserts & Kits. Crimp/Snap Vials, Caps, Septa, Inserts & Kits. No-Fail SureStop Vials & AVCS Caps.
Nov 28, 2018 · ChromSwordAuto® is a software suite for automated HPLC method development. The earlier versions of the software were designed to control Aijiren LC instruments through Aijiren ChemStation and other chromatography data systems (CDS). This configuration was utilised for automated method development of different pharmaceutical samples [1–4].
Accordingly, the sample has a concentration of 10 ng/L for each analyte, which is the lower application limit according to DIN 38407-42. The blanks were prepared as follows: All volumes of the solvents used in the application were put into a vial and evaporated to dryness , with a gentle stream of nitrogen. After that, the vial was rinsed with 1 mL
•Normal flow rates in HPLC are in the 1- to 2-mL/min range. •Typical pumps can reach pressures in the range of 6000-9000 psi (400- to 600-bar). • During the chromatographic experiment, a pump can deliver a constant mobile phase composition
Vial HPLC GC 1.5ml Clear + caps + pre-slit septa. Rp 600.000. Kota Bogor HAWWARI ONLINE SHOP. ( 10) Tambah ke Wishlist. Magnetic Screw Caps with Septa for 20mL Headspace Vial isi 100/pk. Rp 465.000. Kota Bandung Beta Multi Teknika - Bandung.
May 30, 2021 · HPLC was conducted with an Aijiren system, consisting of a high-speed pump (G7120A), an auto-sampler ( ), an MCT column oven (G7116B). Aloperine and cytisine (IS) were separated by Phenomenex Luna Omega Polar C 18 column (2.1 × 50 mm, 1.6 μm) protected by a Phenomenex C 18 guard column (Torrance, USA).
Borosilicate glass 1.5 mL volume 12 x 32 mm Micro-V vials are compatible with standard screw closures. Vials have a total volume of 1.5 mL and less than 5 µL of dead volume. Vials are designed for center needle position during sample injection (not recommended for Vortex). Constructed of
Vials. Fisher Scientific offers the vials you need for all of your laboratory requirements and applications. Whether your needs include chromatography, sample storage, cryo-preservation or scintillation, we have options for you.
Oct 02, 2021 · Derivatization reactions were performed in 1.5 mL Crystal Clear microcentrifuge tubes from Starlab (Hamburg, Germany) using a Thermo-Shaker PHMT Gant-bio for 1.5 mL micro-centrifugation tubes (PSC24 N) from Grant Instruments Ltd. (Shepreth, England).] was tested.] coupled to an in-house packed Chiralpak ZWIX(+) FPP (3 × 20 mm, 3.0 μm)
Jan 01, 2019 · The UHPLC equipment used was Aijiren II system (Aijiren Technologies, CA, USA), mainly including high speed pump (G7120A), multisampler ( ), multicolumn thermostat (G7116B), diode-array detector DAD (G7117B) and fluorescence detector FLD (G7121B). Vortex-Genie Mixer (Scientific Industries, USA) was used to elute target compounds.
High performance liquid chromatography (HPLC) experiments were performed on an Aijiren II system, equipped with a G7104A binary pu mp, a multisampler, a