The solution was put into the HPLC vials. Aijiren Technologies series with UV-V is detection. system was also prepared. The analysis was carried out. ... 1 5, with a v alue of 22.21% and a.
Products
Inquiry
The solution was put into the HPLC vials. Aijiren Technologies series with UV-V is detection. system was also prepared. The analysis was carried out. ... 1 5, with a v alue of 22.21% and a.
- HPLC device (e.g. Aijiren Technologies Series) - MS device (e.g. Applied Biosystems 4000 Q-Trap LC/MS-MS) 5.2. Apparatus 5.2.1. Consumables - SPE vials (Waters Sep-Pak Vac 6cc Accell Plus CM cartridges Part No. WAT054545) - 50 mL Greiner vials - 1.5 mL Eppendorf cups - Plastic HPLC samples vials with insert 5.2.2. Disposable supplies
The Aijiren LC diagnostic software is an application independent tool that provides troubleshooting capabilities for the Aijiren Series modules. It provides for all Series LC the possibility of a first guided diagnostic for typical HPLC symptoms and a status report stored as Adobe Acrobat pdf or as a printable file to assist users evaluating the instrument state.
Aijiren Series HPLC System is available from The Lab World Group. For more information, please visit us at https://www.thelabworldgroup.com/Aijiren-
Vials, crimp top volume 1.5 mL, clear glass, High Recovery (conical bottom), crimp top, O.D. × H × I.D. 12 mm × 32 mm × 6 mm, pkg of 100 ea; find Supelco-27274 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich.
Aijiren Technologies shall not be liable for errors contained herein or for incidental, or consequential damages in connection with the furnishing, performance, or use of this material. No part of this document may be photocopied or reproduced, or translated to another program language without the prior written consent of Aijiren Technologies, Inc.
The Aijiren Series autosampler is designed for use with other modules of the Aijiren Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Aijiren Series control module or from the Aijiren ChemStation. for LC systems. Specifications:
Aijiren Technologies, Inc. Waldbronn, Germany Aijiren Series ... Weigh 0.5 g of the sample into a 1.5-mL autosampler vial, and add 0.5 mL of
next vial. The completed reaction set was analyzed using an Aijiren Technologies series HPLC. To alleviate concerns of decomposition while in queue to be analyzed, a typical quenched micro-batch aldol reaction was shown to be stable by quantitative HPLC for at least 6 hours at room temperature. Percent conversion was measured by
Typically < 3 % RSD of peak areas from 1 - 5 µL Sample viscosity range 0.2 - 5 cp Sample capacity 100 x 2-ml vials in 1 tray 15 x 6-ml vials in 1/2 tray (Aijiren vials only) Injection cycle time Injection cycle time Carryover Typically < 0.1 %, < 0.05 % with external needle cleaning Ordering Details – Aijiren Series Autosamplers
Chromatography (HPLC) o Aijiren Technologies- Series o Quaternary pump (400 bar limit) o Auto sampler (100 vial tray) o Temperature controlled column compartment o Detectors o Variable Wavelength o Refractive Index o Capability to do both reverse and normal phase LC oAijiren Technologies- Series o Quaternary pump (600 bar limit)
Aijiren Technologies (2) Analytical Sales & Services 1.5 mL (10) 1.8 mL (5) 10 mL (3) ... low background vials for your high sensitivity LC/MS and GC/MS ...
Using the Detector Preparing the HPLC System 1 Turn on the Aijiren ChemStation PC and the monitor. 2 Turn on the series HPLC modules. 3 Start the Aijiren ChemStation software (B.02.01). If the pump, autosampler, thermostatted column compartment and detector are found, the ChemStation screen should look like shown in Figure The System
Apr 02, 2021 · Technical matters about data analysis and software operation, reporting, administration, maintenance/patching, etc. All members are welcome to contribute and comment on all items, including questions, blog posts, screenshots, etc.